Model Number

JPD-3150

1. Application
The line is mainly used for laying-up power cable of large sectional area and long length. It also can be used for armoring with steel wire or steel tape and screening with copper tape.

2. Main technical data
2.1) Type: JPD-3150 Drum Twister Cable Laying-up Machine
          (with steel wire armoring and caterpillar haul-off)
2.2) Purpose: Cabling and armoring
2.3) Finished Cable dia.: Φ25-130mm
2.4) Laying-up pitch: 200～8000mm
2.5) Number of steel wire for armoring: 96
2.6) Steel wire dia.: Φ0.6mm(max.)
2.7) Rotating speed of drum pay-off: 30r/min
2.8) Haul-off line speed: 50 m/min(max.)
2.9) Haul-off:5000daN(max.)
2.10) Nonmetal taping unit
2.10.1) Number of taping bobbin:2
2.10.2) Out dia. of taping bobbin: Φ600mm
2.10.3) Width of taping tape:15-80mm
2.10.4) Rotating speed: 500r/min(max.)
2.11) Metal taping unit
2.11.1) Number of taping bobbin: 2
2.11.2) Out dia. of taping bobbin: Φ800mm
2.11.3) Width of taping tape:15-60mm
2.11.4) Rotating speed: 300r/min(max.)
2.12) Rotary pay-off reel size: PN1600-PN2000 (4 sets)
2.13) Center pay-off reel size: PN2000-PN3150 (1 set)
2.14.) Take-up reel size: PN2000-PN3150
2.15) Line center height: 1000mm
2.16) Diameter of cable hole:≥Φ140mm

3. Line configuration
3.1) Φ2000 rotary pay-off stand.......................4 sets
3.2) Φ3150 center pay-off stand.......................1 set
3.3) Guiding roller stand..............................7 sets
3.4) Closing die stand.................................1 set
3.5) Tandem pressing die stand.........................1 set
3.6) Nonmetal taping unit..............................1 set
3.7) Pre-spiral head for steel wire....................1 set
3.8) Steel wire armoring device........................1 set
   (96B pay-off stand for steel wire, guide roller, straighten device, closing die, die stand,etc.)
3.9) Metal taping unit.................................1 set
3.10) Pay-off stand for filling material...............2 sets
3.11) Caterpillar haul-off(including length counter)...1 set
3.12) Φ3150 rotary take-up stand......................1 set
3.13) Electric transmission and control system.........1 set
3.14) Pneumatic and hydraulic control system...........1 set
3.15) Safety cover of machine..........................1 set